Showing posts with label L. Show all posts
Showing posts with label L. Show all posts
Saturday, 28 May 2011
Tuesday, 24 May 2011
Latching Continuity Tester
This latching continuity tester detects intermittent (and steady state) opens and shorts. The tester will detect and latch on an intermittent condition with a duration of less than a millisecond. In addition, it provides both visual and (defeatable) audio indicators, uses only one inexpensive and easy-to-find IC, and can be built very cheap if you have a well-stocked junk box.
Read More
Latching Continuity Tester
Live Graph
LiveGraph is a framework for real-time data visualisation, analysis and logging. LiveGraph was developed in the academic domain and is being used for research on daily basis. Being open source, LiveGraph is absolutely free. LiveGraph particularly useful for all applications that require live
visualisation of large amounts of data in form of graphs and charts.
LiveGraph Read More Here
Wednesday, 18 May 2011
Light Detector with NE555
Cadmium sulphide or cadmium sulphide (CdS) cells rely on the material's ability to vary its resistance according to the amount of light striking the cell. The more light that strikes the cell, the lower the resistance. Although not accurate, even a simple CdS cell can have a wide range of resistance from less than 100 Ω in bright light to in excess of 10 MΩ in darkness. Many commercially available CdS cells have a peak sensitivity in the region of 500nm - 600nm. The cells are also capable of reacting to a broad range of frequencies, including infrared (IR), visible light, and ultraviolet (UV). They are often found on street lights as automatic on/off switches. They were once even used in heat-seeking missiles to sense for targets.
Sunday, 8 May 2011
LASER-BASED INTRUDER ALARM
You can use this laser-based
intruder alarm conveniently
at the entrance of a hall or any
other similar location to protect the
same from unauthorised access as and
![]() |
| Fig 1 |
when desired. Its range can be extended
further to protect the perimeter of a
building from unauthorised intrusion
by using a cascade arrangement of
multiple alarms.
The circuit consists of a transmitter
and a receiver.
The transmitter circuit (shown in
Fig. 1) is nothing but a laser diode
(LD1) driven by a 9V PP3 battery. The
output of IC1 is regulated 5V as long as
its input remains equal to or more than
7.5V, thus ensuring a constant drive
current for the laser diode. The battery
(Batt1) is connected to the circuit
through switch S1.










